| |
Repsol Tauro 680
Description
These Oils are for all types of industrial gears. They are obtained from selected base stocks to which a series of additives are incorporated, including a sulphur-phosphor type, which give these oils their specific extreme pressure characteristics.
Recommended uses
They are specially suitable for all types of industrial enclosed gear drives lubricated by splash or circulation, whether or not they are preheating or cooling systems.
Properties
Forms strong lubricating film.
High load capacity.
Good oxidation stability.
Good non-foaming stability.
Anti-rust protection.
Resistance to temperature.
Not corrosive to copper and its alloys.
Good performance in the presence of water.
Quality level
DIN 51517 Part. 3 CLP AGMA 9005 ¡Ì D94
ISO 6743/6 ¨C CKC US Steel 224
Technical Characteristics
|
UNIT |
METHOD |
VALUE |
VALUE |
VALUE |
VALUE |
VALUE |
VALUE |
ISO Grade |
|
|
100 |
150 |
220 |
320 |
460 |
680 |
Viscosity, 100¡İC cSt |
|
ASTM D 445 |
11,3 |
14,8 |
18,7 |
23,7 |
29,8 |
40,0 |
Viscosity, 40¡İC cSt |
|
ASTM D 445 |
100 |
150 |
220 |
320 |
460 |
680 |
Viscosity Index |
|
ASTM D 2270 |
98 |
95 |
94 |
93 |
92 |
95 |
Pour Point |
¡İC |
ASTM D 97 |
-12 |
-12 |
-12 |
-12 |
-12 |
-12 |
Flash Point C/O |
¡İC |
ASTM D 92 |
195 |
200 |
205 |
210 |
215 |
220 |
Demulsibility
Free water
Mulsibility |
Cm3
Cm3 |
ASTM D 2711 |
80 min
1 max. |
80 min
1 max. |
80 min
1 max. |
80 min
1 max. |
80 min
1 max. |
80 min
1 max. |
Rust, methods A
and B |
|
|
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
TIMKEN OK |
lb |
ASTM D 2782 |
55 |
55 |
60 |
60 |
60 |
70 |
FZG, tage 12 |
|
DIN 51354 |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
Available in
150 ISO Grade: 875 Kg. Containers and 185 Kg. Drums.
220 and 320 ISO Grades: Bulk, 875 kg containers and 185 Kg. Drums.
460 ISO Grade: Bulk and 185 Kg. Drums.
100 and 680 ISO Grades: 185 Kg. Drums.
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means. |
|
